Concrete Countertop Edge Profiles 50 Feet 4 Designs
SureCrete Concrete countertop edge profiles are available in four unique designs. All profiles come in 50-foot roll lengths and are 1 1/2 inches wide.
DATA SHEET DOWNLOADS
Concrete Countertop Edge Profiles 50 Feet 4 Styles by SureCrete
SureCrete's concrete countertop edge profiles are available in 50' rolls and also custom lengths at many of our distribution locations around the world. These edge profiles, made from extruded PVC, offer a more cost-effective solution for one-off pours. Offered in 50-foot lengths allows for seamless pieces, resulting in less casting time. Edge Molds are the easiest and most cost-effective way to form a decorative edge profile on concrete countertops, furniture and other concrete and GFRC projects. Available in 4 different styles; Chamfer, Eased Square, Ogee and Bullnose pieces to create detailed edge designs with all concrete countertop mix and GFRC mixes, either precast or cast in place.
These decorative edge mold form liners are easy to work with and durable enough to be used many, many times. Trim to length with a standard razor knife. Support the concrete countertop edge mold with plywood angles, standard 2x4 lumber, foam or any other rigid material. Create any shape. Perfect for forming openings for under mount sinks. Use bare or with your preferred release. Installation is easy with our custom three-quarter inch wide Pressure Sensitive Adhesive double-sided form tape. Clean with water or denatured alcohol as needed.
Whether you are looking to make a one-time concrete countertop or bathroom vanity, these edge profiles can add a great level of dimension to your custom concrete pieces. They are easy enough to work with that even in a do-it-yourself project for the weekend warrior with little to no experience, they can be used with little to no training at all. If you are a professional fabricator and looking to make multiple copies of the same piece, these PVC edge details can be re-used sometimes, keeping your production costs down to a minimum.
Concrete Countertop Edge Profile Other Uses:
- Kitchen Countertops
- Dining & Coffee Tables
- Outdoor Kitchens
- Precast Decorative Pieces
- Building Fascades
- Custom Furniture
- Bath Vanities
How Do You Apply SureCrete Concrete Countertop Edge Profiles Detailing Molds:
XS Edge Profiles are a very simple way to improve your precast pieces:
- Measure out your precast edge areas where you intend to use the Edge Details and cut them to your desired length using a razor knife.
- Behind the edge detail, place some form of support to keep the PVC from flexing after your precast mix is placed in the mold. Simplest items are angles, 2x4 lumber pieces or secured foam rails.
- When placing your precast blend into your mold with edge details, make sure to vibrate or push the mix around by hand around the edge detail area to ensure maximum readability and to work out any air pockets or voids.
- Immediately after your cast concrete piece is removed from the mold, remove your edge detail piece and clean it thoroughly to ensure re-usability.
Frequently Asked Questions About Concrete Countertop Edge Profiles:
Question: What lengths are Edge Details available in?
Answer: They are available in full 50-foot lengths, however, many distributors make them available in shorter or custom lengths upon request.
Question: How many times can I re-use Edge Profiles?
Answer: Usually many, many times over - it's completely dependent upon how much care is taken with the pieces as you secure them to your mold, pull your cast concrete piece from your mold and clean the edge details once removed.
Specs and Properties
Specifications and Properties of SureCrete's Concrete Countertop Edge Profiles
Material Type Extruded PVC
Detail Height 1-1/2″
Roll Length 50′
Bull Nose Edge – 50 Linear Feet of 1.5″ Countertop Edge Profile SKU: 45106014 | UPC: 842467107829
Chamfer Edge Edge – 50 Linear Feet of 1.5″ Countertop Edge Profile SKU: 45106015 | UPC: 842467107836
Eased Square Edge – 50 Linear Feet of 1.5″ Countertop Edge Profile SKU: 45106016 | UPC: 842467107843
Ogee Edge Edge – 50 Linear Feet of 1.5″ Countertop Edge Profile SKU: 45106017 | UPC: 842467107850
Additional information
Style | Bull Nose Edge – 50 Linear Feet of 1.5", Chamfer Edge Edge – 50 Linear Feet of 1.5", Eased Square Edge – 50 Linear Feet of 1.5", Ogee Edge Edge – 50 Linear Feet of 1.5" |
---|