Decorative Epoxy Floor and Countertop System Trans4loor™ Metallic – Step 1 Black Base Coat
TRANS4LOOR METALLIC DECORATIVE EPOXY SYSTEM is a two-component, solvent free, 100% solids epoxy/amine system designed specifically for applications over concrete floors and countertops where maximum durability and chemical resistance are required within a decorative metallic system. The high gloss material is available in a solid color base coat, and a clear formula where metallic pigments* are added.
*Metallic pigments purchased separately
Step 1 – Black Base Coat provides an opaque black, 100% solids, high strength base coat – the ideal canvas for the most vibrant and eye-catching metallic effects.
FEATURES AND BENEFITS
- 1:1 mix ratio
- Solvent-free, low odor
- Acts as an adhesive to fill and strengthen around minor cracks, crevices and weak spots
- Easy to use roller application
- Available in 2-gallon and 10-gallon kits
AVAILABILITY
- 2-gallon kit
- 10-gallon kit
DATA SHEET DOWNLOADS
Trans4loor™ Metallic - 100% Solids Epoxy Black Base Coat by SureCrete
Floors aren't the only hard surfaces that can be transformed using Trans4loor™ Metallic Epoxy. So are countertops, precast furniture and more!
TRANS4LOOR Metallic Black Base Coat is a 100% solids epoxy, with low odor and zero VOC's and serves as the perfect base for concrete surfaces where a smooth, glossy, attractive and highly durable metallic finish is required. The high performance, self-leveling characteristics generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable. It is ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.
Typical Applications:
- Retail and Commercial Flooring
- Garage Floors and Showrooms
- Restaurant and Kitchen Flooring
- Interior Residential Living Spaces
- Hotel and Resort Reception Areas
- High-Traffic Interior Applications
- Fast Turn-Around Projects
- Aircraft Hangar Floors
Frequently Asked Questions:
Question: Will Trans4loor Metallic Black Base Coat Epoxy fill small divots and minor cracks?
Answer: Yes, it certainly will! However, be sure not to try to bridge expansion joints as these are necessary to allow movement in the concrete.
Question: Can Trans4loor Metallic Black Base Coat Epoxy be used outside?
Answer: No, epoxy coatings are not vapor-permeable and therefore should not be utilized in exterior applications.
Question: I have strict VOC laws in my area, can I use Trans4loor Metallic Black Base Coat Epoxy?
Answer: Without question, yes! At zero grams per Liter of VOC content, Trans4loor Metallic Black Base Coat Epoxy can be used no matter how strict local VOC laws are!
Specifications and Properties:
| Coverage | 100-150 square foot per gallon per coat catalyzed product (varies widely based on application method) |
| VOC Rating | < 20 g/L |
| Solids Content | 100% |
| Shelf Life | 2 years in original unopened container |
| Mixing Ratio | 1 parts A to 1 part B |
| Pot Life | 10-20 minutes |
| Ready for recoat | 6-8 hours (18+ hours at low temperatures) |
| Light Duty Use | Approx 16 hours (Up to 30 hours at low temperatures) |
| Heavy Traffic Ready | Approx 24 hours (Up to 3 days at low temperatures) |
| Full Cure | 5-7 days (Up to 14 days at low temperatures) |
| Appearance (cured) | High gloss sheen |
| Appearance (wet) | Clear – Straw Color |
| Odor | Epoxy |
| Crosshatch Adhesion | 100% |
| Abrasion Resistance (Tabor) | 80 mg (CS-17,000 cycles, 1000 g mass) |
| Shore D Hardness | 65-70 |
| Application Temperature | 50 – 90 degrees Fahrenheit |
Chemical Resistance:
| MEK | not recommended |
| Xylene | 8 hours splash spill |
| Gasoline | 2 hours splash spill |
| Butanol | 8 hours splash spill |
| Methanol | not recommended |
| Ethyl Alcohol | 8 hours splash spill |
| Skydrol | 2 hours splash spill |
| 10% Sodium Hydroxide | long term immersion |
| 50% Sodium Hydroxide | 2 hour immersion |
| Acetic Acid 5% | 2 hours splash spill |
| 10% Sulfuric Acid | 8 hours splash spill |
| 70% Sulfuric Acid | not recommended |
| 10% Hydrochloric Acid | 8 hours splash spill |
| 20% Nitric Acid | not recommended |
| Ethylene Glycol | 8 hours splash spill |
Additional information
| Size | 2-Gallon Kit Premium Decorative Epoxy Trans4loor™ Metallic, 10-Gallon Kit Premium Decorative Epoxy Trans4loor™ Metallic |
|---|
